Az oldal jelenleg ZÁRVA van!
Kérem próbálkozzon újra egy későbbi időpontban.
Hírlevél
TOP termékek
Termékajánló
Tanúsítvány
SSL Certificate
Termék részletek


Arduino Mega ADK Rev3 - A000069

Arduino Mega ADK Rev3 - A000069
24 105 Ft

The Arduino Mega ADK has the same features as the Arduino Mega board but it is specially designed to work with Android

  • The Arduino MEGA ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones, based on the MAX3421e IC. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs(hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

    The MEGA ADK is based on the Mega 2560.

    Similar to the Mega 2560 and Uno, it features an ATmega8U2 programmed as a USB-to-serial converter.
    Revision 2 of the Mega ADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
    Revision 3 of the board has the following new features:

    •  1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
    • Stronger RESET circuit.
  • Brand
    Arduino
    Típus
    Boards
    Összeszerelést Igényel
    Nem
    Állapot
    Új
    Cikkszám
    A000069