- Újdonságok
- Akciós termékek
- Robotépítés, Alkatrészek [446]
- Robots for the House & Recreation [1]
- Robot Toys and Hobbies [99]
- Professional & Service Robots [0]
- Robot - Books - Apps [5]
- STEM Education [115]
- LED & Lightening [2]
- Smart Devices & Gadgets & IoT [3]
- Wearable Technology [36]
- DIY Modules [1]
- Vendors & Brands [937]
- Adafruit [182]
- Arduino - Genuino [86]
- BBC micro:bit [3]
- BIOLOID [1]
- CodeBug [7]
- Cosmo [1]
- Elegoo [11]
- Elenco - Snap Circuites [19]
- FisherTechnik [6]
- Grove System [0]
- HEXBUG [15]
- Learning Resources [2]
- LEGO [1]
- LittleBits [66]
- Meccano [3]
- MakeBlock [10]
- Meet DIMM™ [1]
- Modern Robotics [0]
- Modular Robotics [2]
- OHBOT [4]
- OSMO [1]
- Ozobot [3]
- OWI [22]
- Pimoroni [0]
- Raspberry Pi [74]
- Sam Labs [1]
- SparkFun [0]
- Sphero [14]
- Thames & Kosmos [10]
- Tinkerbots [4]
- Tetrix Robotics [0]
- UBTECH [9]
- VEX Robotics [19]
- Wonder Workshop [3]
- WowWee [8]
- Málna-PC [347]

4-channel I2C-safe Bi-directional Logic Level Converter - BSS138
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.
-
We do have some other handy level shifters in the shop, from the DIP 74LVC245 to the fancy bi-directional TXB0108. However, neither of these are happy to work with I2C, which uses a funky pull-up system to transfer data back and forth. This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP's app note.
This breakout has 4 BSS138 FETs with 10K pullups. It works down to 1.8V on the low side, and up to 10V on the high side. The 10K's do make the interface a little more sluggish than using a TXB0108 or 74LVC245 so we suggest checking those out if you need high-speed transfer.
While we designed it for use with I2C, this works as well for TTL Serial, slow <2MHz SPI, and any other digital interface both uni-directional and bidirectional. Comes with a fully assembled, and tested PCB with 4 full bidirectional converter lines as well as 2 pieces of 6-pin header you can solder on to plug into a breadboard or perfboard.
-
Brand AdafruitTípus ConvertersÖsszeszerelést Igényel NemÁllapot ÚjCikkszám BBS138