Az oldal jelenleg ZÁRVA van!
Kérem próbálkozzon újra egy későbbi időpontban.
TOP termékek
SSL Certificate
Termék részletek

1 Wire Pi Plus

1 Wire Pi Plus
7 724 Ft

The 1 Wire Pi Plus from AB Electronics UK is a communication board supporting the 1-Wire® protocol designed for use on the Raspberry Pi.  A 5V buffered I2C port is also provided on the board.  The 1 Wire Pi Plus can be securely fitted to your Raspberry Pi using our mounting kit pack.

  • The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wire® bridge device.  The DS2482-100 provides bi-directional protocol conversion between the I2C port on the Raspberry Pi and any attached 1-Wire® slave devices.  An ESD Protection Diode is used to protect the 1 Wire Pi Plus and Raspberry Pi from electrostatic spikes on the 1-Wire® port.  Connections to the 1-Wire® port can be made through the RJ-12 socket or the solder points on the PCB.  We have a knowledge base article for configuring and using the 1-Wire® port on your Raspberry Pi.

    The 1 Wire Pi Plus is powered through the host Raspberry Pi using the GPIO port and extended pins on the GPIO connector allow you to stack the 1 Wire Pi Plus along with other expansion boards.

    A 5V input port is also provided allowing you to use an external power supply on the 1-Wire® interface, reducing the load on the Raspberry Pi.  If you choose to use the external 5V input please remove the jumper on the board to isolate the Raspberry Pi 5V bus.

    A detailed tutorial has been written by Jack Creasey, author of Raspberry Pi Essentials,for the setup of OWFS with the 1 Wire Pi and 1 Wire Plus boards. View the tutorial.

  • Brand
    Raspberry Pi
    Összeszerelést Igényel